Tempo conversion
Milliseconds to BPM calculator
Type a delay time in milliseconds and read the tempo it belongs to, or type a tempo and get the milliseconds back. Both boxes stay in sync.
Delay time in milliseconds
—
One beat
—
One bar (4/4)
—
Eight bars
—
Tempo
—
Change either box and the other one follows. Use the milliseconds side when a pedal or a plugin only takes a number, and the BPM side when you are matching a tap you already have.
Converting milliseconds to BPM
If a pedal, a tape echo or a plugin is already set to a delay time you like, and now you need to know which tempo that delay belongs to, type the milliseconds into the second box. The first box fills in with the tempo in BPM, and the readouts show how long one beat, one bar of 4/4 and eight bars last.
Going the other way is just as common: type a tempo and the millisecond value appears. The two boxes stay in sync, so you can nudge either one and watch the other follow.
The maths is simple. One minute has 60,000 milliseconds, so a quarter note delay in milliseconds is 60,000 divided by the tempo. A 120 BPM session gives 500 ms; a 90 BPM session gives 666.7 ms; a 174 BPM drum and bass tempo gives 344.8 ms.
Which note value is your delay?
A delay value on its own only tells you the tempo if you know which subdivision it represents. 250 ms is an eighth note at 120 BPM, but it is also a quarter note at 240 BPM and a dotted eighth at 80 BPM. When you are reverse engineering a delay you heard in a reference track, try it against a few tempos in the usual range for the genre before you trust the first answer.
If you know the delay was set to a dotted value, multiply the straight value by 1.5 before you convert. A 375 ms delay at 120 BPM is a dotted eighth, and if you feed 375 into this tool you will get 160 BPM, which is the tempo at which 375 ms would be a plain quarter note. That is not a mistake in the calculator, it is a different question.
Handy reference points
- 500 ms is a quarter note at 120 BPM, and an eighth note at 60 BPM.
- 375 ms is a dotted eighth at 120 BPM, the classic lead vocal delay.
- 250 ms is an eighth at 120 BPM and the most common tape slap setting.
- 1000 ms is a quarter at 60 BPM and a half note at 120 BPM.
Why the bars matter
The bar and eight-bar readouts are for planning rather than for effects: they tell you how long a loop or a phrase will run in milliseconds, which is useful when you are setting a pre-roll, timing a riser, or working out where a one-bar delay will land on the next section.
Related calculators
For the full set of note divisions at any tempo, use the delay time calculator. If you need the frequency of a tempo instead of its duration, the BPM to hertz calculator answers that.